Mitsubishi Electric Q173DSCPU Programming Manual page 256

APPENDICES
Control mode
Command generation axis
Error
code
1310
(4) System errors (1300 to 1399)
These errors are detected at the power-on.
The error codes, causes, processing and corrective actions are shown in Table
1.13.
Table 1.13 System error (1300 to 1399) list
• Initial communication with the
Multiple CPU system did not
complete normally.
• Motion CPU fault.
Error cause
processing
Positioning
control does
not start.
APP - 27
Error
Corrective action
• Replace the Motion CPU.