Mitsubishi Electric Q173DSCPU Programming Manual page 221

8 AUXILIARY AND APPLIED FUNCTIONS
4) The search fails.
Cam axis current value per cycle
Cam axis current feed value
(Current feed value)
Cam reference position
(b) With a feed operation cam pattern
1) Search from "Cam axis current value per cycle = 0".
(Cam data starting point = 0)
Cam axis current value per cycle
Cam axis current feed value
(Current feed value)
Cam reference position
2) Search from a value in the middle of the cam axis current value per
cycle. (Cam data starting point = 0)
Cam axis current value per cycle
Cam axis current feed value
(Current feed value)
New cam reference position
Cam reference position
at starting the restoration
[Pr.468] Cam axis current value per cycle
(Initial setting)
(D15112+150n, D15113+150n)
Update the cam reference
position in the next cycle
automatically.
8 - 22
Restoration fails. No match
is found for the current
feed value within1 cycle.
Search from "Cam axis
current value per cycle=0".
Restore to the first current
feed value that matches.
(Other values are not restored.)
Restore to the first
current feed value
that matches.