The Aposs Window - Danfoss MCO 305 Design Manual

MCO 305 Design Guide
__ PC Software Interface __

The APOSS Window

The APOSS Window allows simultaneous access both to an APOSS program and to a controller. Multiple
APOSS windows can be opened, each accessing a different APOSS program and a different controller.
The Edit Window displays the APOSS program being edited and provides all the usual text editing features.
Different colors are used to distinguish between comments, program sections, operators, numbers, etc. You
can alter the colors using Settings → Editor.
The Communication Window displays both messages from the APOSS-IDE (e.g. compiler messages) and
messages from the controller (e.g. programmed PRINT commands). Messages from the controller will be
prefixed by the controller ID number (e.g. "[01]" in the above example).
The Watch Window is useful during debugging. It allows the user to "watch" various aspects of both the
controller and the executing program while the controller is operating. See Development → Watch Add for a
description of how to use the Watch Window.
Title and Tool Bar
The Title bar displays the name of the APOSS program. If a controller is connected, then the controller ID
number and the connection interface type will also be displayed. In the event of a controller error, the error
is also shown in the title bar.
The Tool bar offers "single-click" access to several
commonly used functions. These functions are
described later in the manual.
56
®
MG.33.L5.02 – VLT is a registered Danfoss trademark