Danfoss MCO 305 Design Manual page 91

MCO 305 Design Guide
CAM-Editor Window
The CAM-Editor Window is divided into four sections:
– Curve Profile diagram.
– Index Cards: Curve Data, Curve Info, and all the axis parameter index cards normally available using
Controller → Parameters → Axis.
– Settings for displaying and hiding various attributes of the curve profile diagram.
– Fix Points and Start Stop Points tables.
The CAM-Editor window can be resized in the standard way. As well, the splitter bars between the four
window sections can be adjusted using the mouse in the standard way. The splitter bars can be restored to
their default positions by using the →
__ APOSS Tools __
Reset splitters toolbar button.
®
MG.33.L5.02 – VLT is a registered Danfoss trademark
91