Danfoss MCO 305 Design Manual page 108

MCO 305 Design Guide
Array Editor Functions
If the Array Editor has been started from with the
APOSS IDE, then all Array Editor functions will be
available on the toolbar. The Array Selection Box is
displayed rightmost.
If the Array Editor has been started stand-alone,
then all functions will be available as normal dialog
buttons. The Array Selection Box is displayed in the
bottom left corner:
Connect / Select
Connect to a controller or switch an existing connection to another controller. This will cause the arrays
and parameters to be automatically loaded from the new controller. The new values will be displayed in the
"Controller" column.
In the stand-alone Array Editor, this function is provided by the → Select button.
Read from controller
This button will re-read all arrays and parameters from the controller. The new values will be displayed in
the "Controller" column.
Write to controller
This button will cause all the values from the "Value" column in all arrays (even values in arrays that are
not currently being displayed), to be written to the controller. Items that have no value (i.e. a blank in the
"Value" column) will retain their existing values. Once the values have been written to the controller, the
"Controller" column will be updated to reflect the new values on the controller.
Overlay descriptions
This button will allow list item names, descriptions, minimum values, maximum values, and default
values to be copied from an existing array definition file into the Array Editor.
This function is not available in the stand-alone Array Editor.
Add array
add a new array. A dialog provides the definition of array number and size.
This function is not available in User mode. Arrays can only be added in Expert mode.
Delete array
or pressing [Esc] delete the currently selected array. The array must be selected in the "Array selection
list".
This function is not available in User mode. Arrays can only be deleted in Expert mode.
Add index
insert a new item into the list. The item will be
inserted before the currently selected list item. A
dialog provides the types.
This function is not available in User mode. New
items can only be added in Expert mode.
108
__ APOSS Tools __
®
MG.33.L5.02 – VLT is a registered Danfoss trademark