Danfoss MCO 305 Design Manual page 142

MCO 305 Design Guide
__ APOSS Tools __
Changing Byte order will also change the order of the example so that the user can tell exactly how the
incoming PDO bytes will be handled.
The Bit Mask fields contain hexadecimal values that will be used as a mask to extract the curve data from
the selected bytes. The small button under each field can be used to toggle the mask between 0xFF and
0x00. Under these buttons, the same example bytes are displayed again, this time incorporating the bit
mask. And finally, the user can specify whether the value is to be treated as a signed or unsigned value.
Name
This is the name that will appear in the "Curve Selection List". A default name will be generated but the user
is free to change this to any other desired name.
Color
This is the color that will be used to draw the curve. The Select button can be used to choose a different
color.
142
®
MG.33.L5.02 – VLT is a registered Danfoss trademark