Danfoss MCO 305 Design Manual page 119

MCO 305 Design Guide
__ APOSS Tools __
Oscilloscope Window
The layout of the Oscilloscope Window is shown above. Note that when an Oscilloscope Window is active,
then the normal APOSS menu and toolbar are replaced by a custom menu and toolbar for the Oscilloscope.
The Oscilloscope Window as a whole can be resized using the standard Microsoft Windows mechanisms. As
well, the individual sub-windows can be resized by dragging the "splitter" bars that separate the windows,
using the left mouse button.
Note that if the windows are made too small, then the Oscilloscope will stop displaying the charts rather
than continue to "shrink" the charts past the point where they become unusable.
Chart Window
The Chart Window is the main graphical display
window for the Oscilloscope. The curves represen-
ting the collected data values are displayed here.
The chart displayed in this window can be zoomed in
and out, panned, and modified in various ways in
order to see more or less detail in the curves.
119
®
MG.33.L5.02 – VLT is a registered Danfoss trademark