Danfoss MCO 305 Design Manual page 81

MCO 305 Design Guide
__ PC Software Interface __
Options
Only in APOSS stand-alone: This dialog allows you
to select various options that control the behavior of
APOSS. When settings are changed in the → Options
dialog, the settings will take effect the next time
that they are used.
Open last file
If this option is enabled, then when APOSS starts, it will automatically try to reopen the most recently used
file.
Open windows maximized
If this option is enabled, then all windows opened in APOSS will be opened full-size. They can subsequently
be reduced in size, if desired; they will simply be opened full-size. If this option is not enabled, then only
the first window opened will be opened full-size. If a second window is opened, then all windows will be
made smaller so that all windows can be seen simultaneously.
Autosave
Enabling this option will cause APOSS to automatically save the current file being edited to disk before
compiling and executing it. If not enabled, then APOSS will use a temporary file for compiling the current
file.
Binary file support
If enabled, then APOSS will allow the direct handling of binary compiled program images in the Controller →
Programs window. This includes uploading compiled programs from the controller so that they can be saved
on the PC and downloading previously saved binary images back to the controller. Note that these binary
images cannot be edited; they can only be saved and restored. Also note that some older controllers do not
support this feature.
If enabled, this option will also cause the item "Compile to file" to be added to the Development menu (once
APOSS has been re-started the next time). This item allows to user to manually compile and save the
current program file to a binary file.
See also BinFileMap in illustrations in chapter Appendix in the MCO 305 Command Reference.
Print color
If this is enabled, then programs printed from the Edit Window will be printed in color using the same colors
as the Edit Window. Otherwise, programs will be printed in black and white.
81
®
MG.33.L5.02 – VLT is a registered Danfoss trademark