Danfoss MCO 305 Design Manual page 115

MCO 305 Design Guide
For Group items, the Array column determines when the heading is to be displayed and should contain one
of the following:
-1 - Always displayed.
-2 - Displayed only when the "User" array (or "All") is selected.
-3 - Displayed only when the "Global" array (or "All") is selected.
-4 - Displayed only when the "System" array (or "All") is selected.
-100-n - Displayed only when "Axis n" (or "All") is selected (e.g. -101 for axis 1).
-200-n - Displayed only when "Temp n" (or "All") is selected (e.g. -201 for axis 1).
-300-n - Displayed only when "Proc n" (or "All") is selected (e.g. -301 for axis 1).
0-based array number - Displayed only when the corresponding array (or "All") is selected.
The Index column should be 0 for Group items.
The Name and Description strings may contain commas, semicolons, and blanks but, if so, then the string
must be enclosed in double quotes. These strings must not contain double quote characters.
The Read/Write flag may be either 0 (for Read-only) or 1 (for Read/Write).
Example of an Array Definition File
Date,2009:07:27 10:52
Widths,150,40,40,40,70,70,70,70,70,365
This is a comment line.
User,,130,Height,50,100,10,1000,"Maximum height of any unit",1
User,,131,Width,10,20,5,200,"Maximum width of any unit",1
User,,132,Weight,5,,1,20,"Maximum weight of any unit",1
User,,135,"Number of units",3000,,,,"Number of units to process",1
***** Another comment line *****
Group,0,0,"Quantity by Country",,,,,,0
Array,0,1,Switzerland,5,10,0,5000,"This is the first value in array 0",1
Array,0,2,Germany,5,100,0,5000,"This is the second value in array 0",0
Array,0,3,France,5,50,0,5000,"This is the third value in array 0",0
Array,0,4,Canada,5,1,0,5000,"This is the fourth value in array 0",1
Group,-1,0,"Other Important Values",,,,,,0
Array,0,8,Extra,123,4,-10000,10000,"This is an extra value in array 0",1
Array,1,99,Total,250,300,200,500,"This is the total",1
Array,3,5,"Test Value",1,0,0,1,"Test: 0 - No, 1 - Yes",1
If an array definition file is being created using a spreadsheet, then the spreadsheet columns must be set
up exactly as described above. The spreadsheet can then be saved as a "CVS (Comma delimited)" file type.
This will generate the correct comma-separated or semicolon-separated file. The file should be then be
renamed to give it the ".zba" file extension.
__ APOSS Tools __
®
MG.33.L5.02 – VLT is a registered Danfoss trademark
115