Danfoss MCO 305 Design Manual page 192

MCO 305 Design Guide
File name or Where to find?
topic
Online
help
x
INB_01.M
x
INB_02.M
x
INCL_01.M
x
INCIN01.M
x
INCPOS01.M
x
INCSTA01.M
x
INDEX_01.M
x
INKEY_01.M
x
JerkMinTest.M
x
LOOP_01.M
Marker.m x
x
Marker count
x
Marker
Synchronization
x
Mechanical Brake
Control
x
MOTOR_01.M
x
Move-S.m
x
MSTOP_01.M
x
NOWAI_01.M
x
ONINT_01.M
x
ORIG_01.M
x
OUT_01.M
x
OUTB_01.M
x
POS_01.M
x
Position
Synchronizing
x
Relative
Positioning
x
REPEA_01.M
x
slavesync.m
x
stamping.m
x
STAT_01.M
192
__ How to Program __
Description
Manual or
Software
Displays the status of all digital inputs.
Displays the signal levels of all digital inputs and transfers them to
the outputs. The display and the outputs are updated every time
one of the inputs changes its status
Displays some system information.
Include file:
Displays the status of inputs (graphic)
Include file:
Display of the current and command position.
Include file:
Subprogram to display the system status in plain text.
Searches the index pulse of the encoder.
Intelligent input of a max. nine digit number and calculation of the
cross sum.
Test program for recording of movements with different ramp types
(-> parameter RAMPTYPE).
Displays random horizontal bars.
APOSS Software CAM Control: Printing of Cardboard Boxes with Marker Correction
Measurement of marker distance in connection with SYNCM
Design Guide Marker Synchronization for "Packaging with Varying Product
page 33 Distance and Slip" application sample.
Design Guide Relative Positioning with Mechanical Brake
page 47
Displays position information while the drive is moved by hand (axis
control disabled).
APOSS Software Test run program.
Aborts a position controlled movement and continues it after a short
delay.
Displays information during a motion.
Reaction to interrupts during a positioning motion.
Searching the real zero point after a continuous motion in speed
mode.
Sets some outputs according to the current position.
Copy the status of every input to the corresponding output.
Relative and absolute positioning.
Design Guide Position Synchronizing for "Packaging with Fixed Product Distances"
page 28 application sample.
Design Guide Relative Positioning for "Palletizer" application sample.
page 21
Counts down 10 seconds and starts a continuous motion.
APOSS Software CAM Control: Slave Synchronization with Marker
APOSS Software CAM Control: Stamping of Boxes with Use-by Date
Reads in and displays some system information.
®
MG.33.L5.02 – VLT is a registered Danfoss trademark