Danfoss MCO 305 Design Manual page 193

MCO 305 Design Guide
File name or Where to find?
topic
Online
help
x
syncc_msim.m
x
TORIG_01.M
x
Touch Probe
Positioning
x
Velocity
Synchronizing
x
VEL_01.M
x
WAIT_01.M
x
WHILE_01.M
__ How to Program __
Description
Manual or
Software
Simulation of a master via software command.
Defines different temporary zero points and shows what it means to
the current position information.
Design Guide Touch Probe Positioning for "Palletizer" application
page 23
Design Guide Velocity Synchronizing for Suit Case Conveyor Belt application.
page 25
Varies the velocity during a position-controlled motion.
Demonstrates some types of waiting: time delay wait until target
position is reached wait for a defined input condition.
Waits for an high signal on input 4 and displays all memorized
inputs, made via the COM-interface during this time.
®
MG.33.L5.02 – VLT is a registered Danfoss trademark
193