MCO 305 Design Guide
Troubleshooting
Warnings and Error Messages
All messages are shown in the LCP display of the FC 300 in short and in the APOSS software title bar and
communication window including the error number and the meaning.
Starting with MCO 305 the last 50 errors since power up are stored internally. This information is not stored
in flash. It can be read out by APOSS (see Error History) or by SDO access. For every error, not only time
and axis are stored, but also additional error information. This information is error specific.
251
®
MG.33.L5.02 – VLT
is a registered Danfoss trademark