3.5
Protective Covers
Follow the procedure below to remove the protective covers for wiring and to reattach the covers after completion.
u IP20 / Open-Chassis Cover Removal and Installation
Models CIMR-LC2V0018B and 4V0009B
n
Removing the Protective Covers
Loosen the screw on the front of the drive and remove the front cover.
1.
Figure 3.4
Apply pressure to the tabs on each side of the terminal cover. Pull the terminal cover away from the drive while
2.
pushing in on the tabs to remove it.
Figure 3.5
YASKAWA EUROPE SIEP
Figure 3.4 Removing the Front Cover
YASKAWA AC Drive L1000V Technical Manual
3.5 Protective Covers
47
3