5.11 S: Elevator Parameters
2: Fast Stop
The motor will decelerate to stop using the fast stop deceleration time in parameter C1-09.
3: Alarm Only
The drive continues to run and will only trigger an oH alarm.
4: Fault After Stop
The drive continues to run and will trigger a fault after stopping.
5: No Detection
Rollback detection is disabled.
u T: Motor Tuning
Auto-Tuning automatically sets and tunes parameters required for optimal motor performance.
Refer to Auto-Tuning on
page 80
for details on Auto-Tuning parameters.
160
YASKAWA EUROPE SIEP
YASKAWA AC Drive L1000V Technical Manual