Protective Covers; Protective Covers; Ip20/Open-Chassis Cover Removal And Installation - YASKAWA CIMR-JC4A0002BAA Quick Start Manual

3.5 Protective Covers

3.5

Protective Covers

Follow the procedure below to remove the protective covers before wiring the drive and to
reattach the covers after wiring is complete.
u

IP20/Open-Chassis Cover Removal and Installation

n Removing the Protective Covers
1.
Loosen the screw that locks the front cover in place to remove.
Figure 3.6 Remove the Front Cover on an IP20/Open-Chassis Drive
2.
Apply pressure to the tabs on each side of the terminal cover. Pull the terminal cover
away from the drive while pushing in on the tabs to pull the cover free.
Figure 3.7 Remove the Terminal Cover on an IP20/Open-Chassis Drive
44 YASKAWA ELECTRIC TOEP C710606 26B YASKAWA AC Drive – J1000 Quick Start Guide
http://nicontrols.com