Three-Phase 200 V Class Drives; Three-Phase 200 V Class Drives - YASKAWA L1000V Technical Manual

A.1 Three-Phase 200 V Class Drives
A.1 Three-Phase 200 V Class Drives
Item
CIMR-LC2V
Maximum Applicable Motor Capacity (kW)
Input Current (A)
Rated Frequency
Input
Allowable Voltage Fluctuation
Allowable Frequency Fluctuation
Input Power (kVA)
Rated Output Capacity (kVA)
Rated Output Current (A)
Overload Tolerance
Output
Carrier Frequency
Maximum Output Voltage (V)
Maximum output speed (Hz)
<1> The motor capacity (kW) refers to a Yaskawa 4-pole motor. The rated output current of the drive output amps should be equal to or
greater than the motor rated current. Select the appropriate capacity drive if operating the motor continuously above motor nameplate
current.
<2> Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor,
wiring connections, and power supply impedance.
<3> Rated motor capacity is calculated with a rated output voltage of 220 V.
<4> Carrier frequency can be set up to 8 kHz while keeping this current rating. Higher carrier frequency settings require derating.
216
Table A.1 Power Ratings (Three-Phase 200 V Class)
<1>
<2>
Rated Voltage
<3>
YASKAWA EUROPE SIEP
Specification
0018 0025
4.0 5.5
18.9 26.0
Three-phase 200 to 240 V 50/60 Hz
9.5 14
6.7 9.5
17.5 25
<4> <4>
150% of rated output current for 60 s
User adjustable between 2 and 15 kHz
Three-phase 200 to 240 V (proportional to input voltage)
120 Hz (user-set)
0033 0047
7.5 11
35.9 51.9
-15 to 10%
±5%
18 27
12.6 17.9
33 47
<4> <4>
YASKAWA AC Drive L1000V Technical Manual
0060
15
70.8
36
23
60
<4>