European Standards; European Standards; Ce Low Voltage Directive Compliance - YASKAWA L1000V Technical Manual

C.2 European Standards
C.2 European Standards
Figure C.1
The CE mark indicates compliance with European safety and environmental regulations. It is required for engaging in
business and commerce in Europe.
European standards include the Machinery Directive for machine manufacturers, the Low Voltage Directive for
electronics manufacturers, and the EMC guidelines for controlling noise.
This drive displays the CE mark based on the EMC guidelines and the Low Voltage Directive.
• Low Voltage Directive: 2006/95/EC
• EMC Guidelines: 2004/108/EC
Devices used in combination with this drive must also be CE certified and display the CE mark. When using drives
displaying the CE mark in combination with other devices, it is ultimately the responsibility of the user to ensure
compliance with CE standards. After setting up the device, verify that conditions meet European standards.
u CE Low Voltage Directive Compliance
This drive has been tested according to European standard IEC61800-5-1, and it fully complies with the Low Voltage
Directive.
To comply with the Low Voltage Directive, be sure to meet the following conditions when combining this drive with
other devices:
n
Area of Use
Do not use drives in areas with pollution higher than severity 2 and overvoltage category 3 in accordance with IEC664.
n
Installing Fuses on the Input Side
Always install input fuses. Select fuses according to
Model
CIMR-LC
2V0018
2V0025
2V0033
2V0047
2V0060
4V0009
4V0015
4V0018
4V0024
4V0031
n
Grounding
The drive is designed to be used in T-N (grounded neutral point) networks. If installing the drive in other types of
grounded systems, contact your Yaskawa representative for instructions.
254
Figure C.1 CE Mark
Table C.1.
Table C.1 Recommended Input Fuse Selection
Fuse Type
Three-Phase 200 V Class
Time Delay Class RK5
600 Vac, 200 kAIR
Non-Time Delay Class T
600 Vac, 200 kAIR
Three-Phase 400 V Class
Time Delay Class RK5
600 Vac, 200 kAIR
Non-Time Delay Class T
600 Vac, 200 kAIR
YASKAWA EUROPE SIEP
Fuse Data
Fuse Model Current Rating [A]
TRS60R
A6T70
A6T100
A6T150
A6T200
TRS30R
A6T50
A6T60
A6T70
A6T80
YASKAWA AC Drive L1000V Technical Manual
60
70
100
150
200
30
50
60
70
80