Lo/Re And Run Led Indicators - YASKAWA L1000V Technical Manual

4.2 Using the LED Operator
u LO/RE and Run LED Indicators
LED
Durnig Run
The drive is in local mode. The
Run command can be entered
from the LED Operator.
Figure 4.2
Figure 4.3
68
Flashing
Lit
• During deceleration to stop.
• When there is a Run command
but the frequency reference is 0.
-
1 s
ON
Flashing
Flashing
ON ON
quickly
Figure 4.2 LED Flashing Speeds
Drive output speed
during stop
Up/Down
10%
0%
Speed setting
OFF
RUN LED
Figure 4.3 Run LED Behaviour
YASKAWA EUROPE SIEP
Flashing Quickly
• During deceleration at Fast-Stop.
• During deceleration.
• During Stop by interlock operation.
-
ON
ON ON
RUN
STOP
ON
Flashing
During Stop
Drive is in remote mode. Run
command is entered from a
remote source.
RUN
STOP
OFF OFF
Flashing
YASKAWA AC Drive L1000V Technical Manual
Off