Top Protective Cover; Top Protective Cover; Removing The Top Protective Cover; Reattaching The Top Protective Cover - YASKAWA E1000 Technical Manual

3.7

Top Protective Cover

Drive models CIMR-E2A0004 to 0081 and 4A0002 to 0058 are designed with IP20/NEMA 1, UL Type 1
specifications, and have a top protective cover on the top. Removing this top protective cover voids the IP20/NEMA 1,
UL Type 1 conformance but still keeps a protection degree in accordance with IP20 enclosure.

◆ Removing the Top Protective Cover

Insert the tip of a straight-edge screwdriver into the small openings located on the front edge of the top protective cover.
Gently apply pressure as shown in the figure below to free the cover from the drive.
Note: Removing the top protective cover from a IP20/NEMA 1, UL Type 1 enclosure drive voids the NEMA 1, UL Type 1 protection
but still keeps IP20 conformity.
Figure 3.24

◆ Reattaching the Top Protective Cover

Align the small protruding hooks on the sides of the top protective cover with the corresponding mounting holes on the
top of the drive. Pinch the hooks inward so that the they connect with the mounting holes and fasten the top protective
cover back into place.
Figure 3.25
YASKAWA ELECTRIC SIEP C710616 35D YASKAWA AC Drive E1000 Technical Manual
Figure 3.17 Removing the Top Protective Cover

Top Protective Cover

Mounting Holes
Figure 3.18 Reattaching the Top Protective Cover
3.7 Top Protective Cover
YEC_common
YEC_common
3
71