Updating The System - Applying Service Pack; Making Backup Copies Of System Information - NEC Express5800/120Rd-2 Service Manual

4-20 Installing the Operating System

Updating the System - Applying Service Pack -

Update the system if the following applies:
CPU is expanded (expanded from single processor to a multi-processor).
!
The system configuration was modified.
!
The recovery process was used to recover the system.
!
Log on to the system with an account that has administrative authority (e.g. Administrator) and
insert the EXPRESSBUILDER CD into the CD-ROM drive of the server.
The EXPRESSBUILDER screen appears, click "Drivers & Utilities" on the "EB Toolbar". Select
"120Rd-2" and click "Windows 2000 NEC Update Module" and setup will start. After that,
follow the prompts to continue the setup process and apply the Service Pack.

Making Backup Copies of System Information

The system information includes the current BIOS settings and other information specific to your
server.
You should save this information after completing the system setup.
This backup data, will allow you to recover the information.
You can save the information using the following process.
1. Insert the EXPRESSBUILDER CD in the CD-ROM drive and reboot the system.
Select [Tools].
2.
Select [Off-line Maintenance Utility].
3.
Select [System Information Management].
4.
Insert a floppy disk in the floppy disk drive.
5.
Select [Save].
6.