NEC Express5800/120Rd-2 Service Manual page 258

7-14 Disassembly and Reassembly
Removing a Hard Disk Drive
Perform the following steps to remove a hard disk drive.
NOTE: If removing a failed hard disk drive, confirm the slot in which the
DISK lamp of the hard disk drive is amber before starting the removal.
See the section "Preparing for Installation and Removal" described earlier to prepare.
1.
Unlock the front bezel with the security key, and remove the front bezel.
2.
Push the lever to unlock, and put the handle down.
3.
Firmly hold the handle and hard disk drive, and pull out the hard disk drive.
4.
If using the server with the hard disk drive removed, install the dummy tray in the empty
5.
slot.
DISK lamps