Starting The Off-Line Maintenance Utility - NEC Express5800/120Rd-2 Service Manual

Starting the Off-line Maintenance Utility

The Off-line Maintenance Utility may be started in many ways.
IMPORTANT:
server is in successful operation.
From the CD-ROM
!
Set the EXPRESSBUILDER CD-ROM in the CD-ROM drive and reboot the system.
After the menu is displayed on the screen, select "Tools" - "Off-line Maintenance
Utility".
The Off-line Maintenance Utility program starts from the CD-ROM.
From the floppy disk
!
Set the Off-line Maintenance Utility Bootable FD in the floppy disk drive and reboot the
system.
The Off-line Maintenance Utility program starts from the boot disk.
The Off-line Maintenance Utility Bootable FD is created by selecting "Tools" - "Create
Support FD" on the EXPRESSBUILDER.
Manual start (by pressing F4)
!
When the Off-line Maintenance Utility is installed, press F4 while the start-up screen of
the server is on screen. The Off-line Maintenance Utility starts from the hard disk.
Do not start the Off-line Maintenance Utility while the
Troubleshooting 6-39