Cleaning Cd-Rom - NEC Express5800/120Rd-2 Service Manual

5-6 Maintenance

Cleaning CD-ROM

A dusty CD-ROM or dust-accumulated tray causes the device to fail to read data correctly.
Follow the procedure below to clean the tray and CD-ROM regularly:
1. Make sure that the server is powered (the POWER/SLEEP lamp is lit).
2. Press the Eject button on the front of the CD-ROM drive.
The tray comes out.
3. Hold the CD-ROM lightly and take it out from the tray.
Do not touch the signal side of the CD-ROM with your hand.
NOTE:
4. Wipe the tray with a dry soft cloth.
IMPORTANT:
may damage the lens and may cause a malfunction of the drive.
5. Press the Eject button or gently push on the tray front to close the tray.
6. Wipe the signal side of the CD-ROM with a dry soft cloth.
IMPORTANT:
CD-ROM cleaner if necessary. Cleaning a CD-ROM with record
spray/cleaner, benzene, or thinner causes damage to the CD-ROM
contents. At worst, inserting the CD-ROM into the server may cause
failure.
Do not wipe the lens of the CD-ROM drive. Doing so
Wipe CD-ROMs from the center to the outside. Use only