Updating The System - Applying Service Pack; Update From Ts Client (Windows Server 2003 X64 Editions - NEC Express5800 User Manual

B-30 Installing the Operating System

UPDATING THE SYSTEM - APPLYING SERVICE PACK -

Update the system in the situation below:
CPU is expanded (expanded to single processor to multi-processor).
Modified system configuration.
Recovered the system using recovery process.
The system update brings the correction program provided by Microsoft to be applied to reinforce
the system security. The system update is recommended.

Update from TS Client (Windows Server 2003 x64 Editions)

IMPORTANT:
network driver to be shared. If not, assign the TS client to make it
shared.
1.
Log on to the system by the account with administrator authority to TS client (such as
administrator).
2.
Insert the NEC EXPRESSBUILDER CD-ROM into the DVD-ROM drive of the TS
client.
If the Master Control menu appears on the TS client screen, terminate the menu.
3.
Select [Run] from the [Start] menu, enter "DVD-ROM drive name on TS
client:\WINNT\W2K3AMD\UPDATE.VBS" on the [Open] box, and click [OK].
Then advance the processing depending on the messages appearing on the TS client
screen.
If the following screen appears, click [Close].
IMPORTANT:
about five minutes have passed. While the system update is applied, the
terminal service connection is automatically disconnected and the CPU
blade is restarted.
Make sure that the TS client CD-ROM is assigned to a
Perform the re-connection to the CPU blade after