NEC Express5800/120Rd-2 Service Manual page 146

4-12 Installing the Operating System
NOTES:
If you click [Cancel] in [Basic Information] screen, the Express
!
Setup will go back to allow you to reselect the Setup File. [Cancel]
exists only in [Basic Information] screen. You can use [Back] in the
subsequent screen to return to the [Basic Information] screen.
If you click [OK] rather than [Next] in [Role of Computer] screen,
!
setup will automatically select default values for the later screens and
continue the installation.
When you complete the setting of setup parameter values, the system will reboot.
When prompted remove the EXPRESSBUILDER CD and the configuration diskette,
9.
and insert the Windows 2000 CD into CD-ROM drive.
The [Software License Agreement] screen appears.
Read the contents carefully and click [I agree.] or press F8 if you do agree. If you do
10.
not agree, click [I disagree] or press F3.
IMPORTANT:
If you do not agree to this agreement, the setup terminates and
!
Windows 2000 will not be installed.
If "NetWare Gateway (and Client) Service" is to be installed, a
!
window to specify the details of "NetWare Gateway (and Client)
Service" will be displayed at first login.
11. If you selected [Apply] on [Apply Service Pack] at Basic Information, follow the
procedure below.
1) When prompted take the Windows 2000 CD out of CD-ROM drive, then click
[OK].
2) When prompted insert the Windows 2000 Service Pack 5 or later into the CD-ROM
drive, then click [OK].
Windows 2000 and any specified applications will be installed automatically and the
local administrator will be automatically logged on to the system. Express Setup has
now completed. Install and configure the device drivers, as described in the following
section.