Updating The System - Applying Service Pack - NEC Express5800 User Manual

F-12 Installing Windows Server 2003 x64 Editions

Updating the System - Applying Service Pack

-
Update the system in the situation below:
CPU is expanded (expanded to single processor to multi-processor).
Modified system configuration.
Recovered the system using recovery process.
The system update brings the correction program provided by Microsoft to be applied to reinforce
the system security. The system update is recommended.
It is necessary to use ServicePack2 or more. ServicePack 2 need not be applied again when
Windows Server 2003 x64 Editions CD-ROM where ServicePack 2 is included is used and it is
installed.
If you install Windows Server 2003 x64 Editions CD-ROM which contains Service Pack 2, you do
not have to apply "Hotfix for Windows x64" or "Hotfix for Windows Server 2003 (KB921411)".
Go to the section of "Updating the System".
Perform "Updating the System" and application of the "Hotfix (KB921411)".
IMPORTANT:
the System" and "Hotfix (KB921411)".
Modified system configuration
Recovered the system using recovery process.
NOTES:
If you use Windows Server 2003 x64 Editions CD-ROM which
includes Service Pack 2, the application of "Hotfix (KB921411)" is
not required.
A computer may stop responding on the Resuming Windows screen
when the computer resumes from hibernation if running an
x64-based version of Windows.
Consider the following scenario:
* A computer has three or more processors.
* X64-based version of Windows that is older than Service Pack 2.
In this scenario, the computer may stop responding on the
Resuming Windows screen.
When the computer resumes from hibernation, the program to
correct the problem of Service Pack 2 or KB902839 (*) is
necessary.
(*) KB902839 can be obtained as follows.
In the situation below, make sure to apply "Updating
http://support.microsoft.com/kb/902839