Table of Contents
Advertisement
4-36 Installing the Operating System
Installing Maintenance Utilities
Various maintenance utilities are contained in your EXPRESSBUILDER CD-ROM. Refer to
your EXPRESSBUILDER User's Guide for installing the utilities on your server or management
workstations.
Updating the System - Applying Service Pack -
Update the system in the situation below:
The system configuration was modified.
!
The recovery process was used to recover the system.
!
In this case, follow the procedure below to update the system.
IMPORTANT:
Be sure to use the Repair Disk Utility to update repair information
!
when the system is updated or install a service pack.
No Service Pack is included on EXPRESSBUILDER.
!
Log on to the system with the account that has administrative authority (e.g.
1.
Administrator).
2.
Insert EXPRESSBUILDER CD into the CD-ROM drive of the server.
3.
The EXPRESSBUILDER screen appears. Click on "Drivers & Utilities" on the
EXPRESSBUILDER toolbar.
4.
Select "120Rd-2." Click on "Windows NT4.0 NEC Update Module" and setup will start.
5.
Select the Service Pack you want to apply.
After that process, follow the message on the window to continue the setup.
Advertisement
Table of Contents
Troubleshooting
