NEC Express5800/120Rd-2 Service Manual page 76

2-12 Setting Up Your Server
At least two persons are required to install the server into the rack.
Firmly fit the inner rails on the sides of the server into the rail assemblies that are
2.
installed to the rack. Slowly push the server into the rack.
Note: If the server is locked on its way into the rack, slowly push it in
while pressing the release levers on the right and left sides of the server.
When the server is installed for the first time, the tight mechanical parts
may offer resistance. You may feel strong friction when sliding the
server into the rack.
3. Confirm that the sliding rails work normally by moving the server in and out of the rack
several times.
The sliding rail can be pulled
out from the rack.
Release lever
WARNING
The sliding rail is stuck to the rack
frame and does not come out.