NEC Express5800/120Rd-2 Service Manual page 219

When a trouble occurs, the system does not "Restart automatically" <Windows 2000>:
→ When a trouble occurs while running Windows 2000, the system may not restart
automatically even if "Restart automatically" is specified. In this case, restart the
system manually.
Cannot turn the power OFF at a blue screen error<Windows 2000>:
→ If you want to turn off the power at the blue screen error, execute forced power off
(forced shut down: press the POWER switch for at least 4 seconds). The power
will not be turned off if you do not hold the POWER switch in for at least 4
seconds.
An error log is included in the event log after log-on <Windows NT 4.0>:
Description (D)
Crash dump is not available for use. Windows NT could not initialize the page file for the boot
partition in response to the crash dump request. The system may have physical memory of 3.8
GB or more.
θ Has additional memory been installed?
→ When you install additional memory, you will need to increase the paging file
size.
Change the paging file size appropriate to the installed memory.
Add 12MB to the real memory and specify the value for the paging file size.
Double-click on [System] in the Control Panel and click on [Performance]. Click
on [Change] for [Virtual Memory].
Change the initialization and maximum sizes and click on [Change].
Restart the system.
NOTE: See Chapter 4 for changing the paging file size on a Windows
2000 system.
Troubleshooting 6-17