Installing Maintenance Utilities - NEC Express5800/120Rd-2 Service Manual

Network Monitor
Network Monitor can help you to investigate and resolve network problems. To use Network
Monitor, you need to restart the system after the installation has completed, therefore it is
recommended you install Network Monitor before experiencing network problems.
1. Point to [Settings] from Start menu and click [Control Panel].
The [Control Panel] dialog box appears.
2. Double-click [Add/Remove Programs].
The [Add/Remove Programs] dialog box appears.
3. Click [Add/Remove Windows Component].
The [Windows Components Wizard] dialog box appears.
4. Check the [Management and Monitoring Tools] check box of the component ON and
click [Next].
5. If the setup asks for a disk, insert Windows 2000 CD into CD-ROM drive and click
[OK].
Click [Complete] in the [Windows Component Wizard] dialog box.
6.
7. Click [Close] in the [Add/Remove Application] dialog box.
8. Close the [Control Panel] dialog box.
To start Network Monitor, point to [Program] → [Administrative Tools] and click [Network
Monitor]. For information on how to operate Network Monitor, refer to Online Help.

Installing Maintenance Utilities

Various maintenance utilities are contained in your EXPRESSBUILDER CD. See
EXPRESSBUILDER User's Guide on the EXPRESSBUILDER CD for installing the utilities on
your server or management workstations.
Installing the Operating System 4-19