Top Cover - NEC Express5800/120Rd-2 Service Manual

7-22 Disassembly and Reassembly
4. Hold the handles and slowly pull out the server from the rack.
The server is latched when a "click" is heard.
When inserting the server back into the rack, push the release
NOTE:
levers on the rails on the sides of the server to unlatch the server. Be very
careful not to get your finger caught in doing so.

Top Cover

Open the top cover when installing/removing an internal device or reconnecting an internal
cable.
Removal
See the section "Preparing for Installation and Removal" described earlier to prepare.
1.
Pull out the server from the rack.
2.
3. Slide the top cover toward the rear of the server while pressing the lock button on the
cover.
Lift off the top cover from the server.
4.
Handles
Set screws