NEC Express5800/120Rd-2 Service Manual page 166

4-32 Installing the Operating System
7. Click [Performance].
8. Click [Change].
The [Virtual Memory] dialog box appears.
9. Modify [Initial Size] in the [Paging File Size for Selected Drive] box to a value larger
than [Recommended Size], and click [Set].
IMPORTANT:
Be sure to create the memory dump initial file with the size described
!
above on the OS partition. If [Initial Size] of the paging file is
specified to the value smaller than "Recommended" value, complete
debug information (memory dump) may not be collected.
For more information on "Recommended" value, see "Specifying
!
Partition Size" described earlier.
In anticipation of problems occurring, it is recommended that a dump
!
file always be prepared in advance.
In case the memory is increased, change the paging file size to suit
!
the new memory size.
10. Click [OK].
A message to restart the system may appear. If so, accept the prompt and restart the
system.