NEC Express5800/120Rd-2 Service Manual page 144

4-10 Installing the Operating System
[Using the configuration diskette]
The Setup Files contained on "configuration diskette" will be displayed.
1) Select the Setup File name to use during the installation.
NOTE: If there is any problem that can not be corrected in the Setup
File you selected, the message to select another "configuration diskette"
appears. In this case, select another setup file or create a new setup file.
After the Setup File is specified, the message "Do you want to review or modify the
Setup File parameters?" is displayed.
2) If you want to review or edit the information file, click [Yes]. If you do not want to
review or edit the information file, and want to continue the installation, click
[Skip].
If [Yes] → Go to step 8.
If [Skip] → Go to step 9.
[Using Blank disk]
3) Click the box under [Setup File Name: (A)] or press A.
The input box appears.
4) Input the file name.
[Operating System to Install] appears.
The OS supported by the computer is displayed in the list.
5) Select [Windows 2000] from the list box.
Confirm the contents specified during OS installation.
8.
Under "Language Information" specify the language version of the operating system to
be installed and the keyboard to be used on the installed system.
If a Disk Array Controller Board is installed in the Express server, the [Configure RAID]
screen appears. Confirm the RAID configuration, modify if necessary, and then click
[Next].
Next, [Basic Information] screen appears. Confirm the existing values, modify as
required, and then click [Next]. ("Supported Computer" shown in the screen differs
according to the model.)
After, click [Next], [Back], or [Help] on the screen to continue. Modify the existing
values as required.