NEC Express5800/120Rd-2 Service Manual page 110

3-20 Configuring Your System
See the table below for setup options on the screen.
Option Parameter
User Password is Installed
Not Installed
Administrator Installed
Password is
Not Installed
Set Administrator Up to 7
Password alphanumeric
characters
Set User Up to 7
Password alphanumeric
characters
User Access Limited
Level
No Access
View Only
Full
Password On [Disabled]
Boot
Enabled
Secure Mode [1 minute]
Timer
2 minutes
5 minutes
10 minutes
20 minutes
60 minutes
120 minutes
Security Hot Key [L]
CTRL-ALT-
Z
Secure Mode [Disabled]
Boot
Enabled
Video Blanking [Disabled]
Enabled
Power Switch [Disabled]
Inhibit
Enabled
Server
Move the cursor onto "Server" to display the Server menu.
Description
Indicates whether the user password is set or
not (view only).
Indicates whether the administrator password
is set or not (view only).
Press Enter to display the administrator
password entry screen. With the administrator
password, all SETUP menus are available for
access. This option is available only when
you log into the SETUP utility with the
administrator password.
Press Enter to display the user password
entry screen. With a user password,
accessible SETUP menus are restricted. This
option is available only if the Administrator
Password is specified.
Sets the User access level when logged
in with user password. When set to "Full",
the system does not enter secure mode.
Specify whether to request a password entry
at boot-up. Administrator password setup is
required beforehand. When the administrator
password is specified and this option is
disabled, the BIOS assumes that a system
boot attempt is made by a user.
Set the period from no input from the
keyboard or mouse to the point at which the
system enters into the secure mode. If this
item is set to "Disabled," the system does not
enter the secure mode.
Specify the hot key to invoke secure mode
features. Pressing the assigned key along with
Ctrl and Alt invoke secure mode. This option
is enabled when User Password is set.
Specify whether the system boots in secure
mode. This option is enabled when User
Password is set.
Specify whether to turn off the monitor
when secure mode is activated.
Enables or disables the POWER switch. If
"Enabled" is selected, power-off with the
POWER switch becomes unavailable after OS
boot-up. (Forced shut down also becomes
unavailable. Forced shut down is a feature to
shut down by pressing the POWER switch for
at least four seconds.)
Your Setting
[ ]: Factory-set