NEC Express5800/120Rd-2 Service Manual page 111

The table below lists options that you can specify on the Server menu screen and their functions.
To make a selection for "System Management", "Console Redirection", and "Event Log
Configuration", first select a desired option and press Enter to display its submenu.
See the table below for setup options on the screen.
Option Parameter
Service Boot Enabled
[Disabled]
Assert NMI on [Disabled]
PERR
Enabled
Assert NMI on Disabled
SERR
[Enabled]
BMC IRQ Disabled
IRQ 5
[IRQ 11]
After Power Stays Off
Failure
[Last State]
Power On
Temperature [Disabled]
Sensor
Enabled
POST Error Disabled
Pause
[Enabled]
Platform Event [Disabled]
Filtering
Description
Specifies whether to boot directly to System
Management menu at system start-up.
Sets support of PCI PERR.
Sets support of PCI SERR.
Sets the BMC IRQ.
Sets the AC-LINK feature.
Determines the mode of operation if a power
loss occurs. (See the table below.)
Enables or disables temperature sensor
monitoring feature.
Specifies whether the system waits for user
intervention on critical POST errors or not.
Enables or disables triggers for system
sensor events inside the Baseboard
Management Controller (BMC).
Configuring Your System 3-21
Your Setting
[ ]: Factory-set