Table of Contents
Advertisement
The following table lists submenu items, available parameter, and descriptions.
Submenu item
Parameter
Reset SCSI Bus at
[Enabled]
IC Initialization
Disabled
Display <Ctrl><A>
[Enabled]
Message During
Disabled
BIOS Initialization
Extended BIOS
[Enabled]
Translation for DOS
Disabled
Driver > 1 GByte
Verbose/Silent
[Verbose]
Mode
Silent
Host Adapter BIOS [Enabled]
Disabled: NOT Scan
Disabled: scan bus
Domain Validation
[Enabled]
Disabled: NOT Scan
Disabled: scan bus
Support
[Boot Only]
Removable Disks
All Disks
under BIOS as
[Disabled]
Fixed Disks
BIOS Support for
[Enabled]
Bootable CD-ROM
Disabled
BIOS Support for
[Enabled]
Int 13 Extension
Disabled
Configuring Your System 3-39
Description
Select "Enabled".
Select "Enabled".
Select "Enabled".
Select "Verbose".
Enable or disable SCSI BIOS.
Select "Enabled" for most cases other than
the following:
•
To boot the OS from a hard disk
connected to an optional SCSI controller.
(If the optional SCSI controller has no
hard disks connected, however, select
"Enabled".)
•
BIOS the SCSI controller may be disabled
to reserve an area in the expansion ROM
space if the controller has no hard disks
connected.
Enable or disable SCSI BIOS.
Select "Enabled".
Select "Boot Only" if "01:06:A" is selected
for "Bus:Device:Channel".
Select "Disabled" if "01:06:B" is selected.
When the default configuration is resumed,
"Boot Only" is selected for both channels. In
such a case, change the parameter for
"01:06:B" to "Disabled".
Select "Enabled".
Select "Enabled".
[
]: Factory-set
Advertisement
Table of Contents
Troubleshooting
