Description Of On-Screen Items And Key Usage - NEC Express5800/120Rd-2 Service Manual

Description of On-Screen Items and Key Usage

Use the following keyboard keys to make changes in the SETUP utility. (Key functions are also
listed at the bottom of the screen.)
Main
Setup Warning
Setting items on this screen to incorrect values
may cause your system to malfunction!
Indicates there
are submenus.
Reset Config Data:
Numlock:
Setup item
menu
Cursor (↑, ↓):
Cursor (←, →):
– and +:
Enter
Esc
F1:
F9:
F10:
Indicates the current menu.
BIOS Setup Utility
Advanced Security
PCI Configuration
Peripheral Configuration
Memory Configuration
Advanced Chipset Control
[No]
[Off]
Selects an item on the screen. The highlighted item is currently
selected.
Selects the Main, Advanced, Security, Server, Boot, or Exit menu.
Changes the value (parameter) of the selected item. When a
submenu option (an option preceded by "
keys are disabled.
Press Enter to select (determine) parameters.
Displays the previous screen.
Press F1 when you need help on SETUP operations. The help
screen for SETUP operations appears. Press Esc to return to the
previous screen.
Sets the parameter of the currently displayed item back to the
factory set parameter.
Sets the parameter back to the one stored by the server before
the SETUP utility was started.
Configuring Your System 3-3
Server Boot Exit
Additional setup menus
to configure PCI
devices.
← →
Select Menu
↑ ↓
Select Item
F9
Setup Defaults
F10
Save and Exit
ESC
Exit
Parameter (high-lights upon selection) menu
") is selected, these
►
Online help
window
Explanation of
key functions
menu