Troubleshooting - NEC Express5800/120Rd-2 Service Manual

On-screen error message
113 Hard disk 0 Error
114 Hard disk 1 Error
115 Hard disk 2 Error
116 Hard disk 3 Error
117 CD-ROM disk 0 Error
118 CD-ROM disk 1 Error
119 CD-ROM disk 2 Error
11A CD-ROM disk 3 Error
11B Date/Time not set
11E Cache memory bad
120 CMOS clear
121 Password clear
140 PCI Error
141 PCI Memory Allocation
Error
142 PCI IO Allocation Error
143 PCI IRQ Allocation Error PCI board interrupt error
144 Shadow of PCI ROM
Failed
145 PCI ROM not found
146 Insufficient Memory to
Shadow PCI ROM
Description
Hard disk error
Hard disk error
CD-ROM disk error
The date and time are not
set.
Cache memory error
The CMOS contents were
cleared.
The password was cleared.
PCI board error
PCI board memory
allocation error
PCI board I/O allocation
error
PCI board shadow ROM
error
The expanded ROM on the
PCI board cannot be
detected.
The area for extending the
expanded ROM on the PCI
board is insufficient.

Troubleshooting 6-5

Action
Contact your sales representative
to replace the system board, SCSI
back-plane, or hard disk.
Contact your sales representative
to replace the system board, SCSI
back-plane, or hard disk.
Contact your sales representative
to replace the system board or the
CD-ROM drive.
Activate the BIOS SETUP utility to
set the date and time.
Install the CPU (processor)
correctly.
Contact your sales representative
to replace the CPU.
Activate the BIOS SETUP utility to
set the CMOS or password.
Contact your sales representative
to replace the system board.
Securely install the PCI boards and
PCI riser card.
Contact your sales representative
to replace the PCI board, system
board, or PCI riser card.
Activate the BIOS SETUP utility to
set the PCI board.
Securely install the PCI boards and
PCI riser card.
Contact your sales representative
to replace the PCI board, system
board, or PCI riser card.
Securely install the PCI boards and
PCI riser card.
Contact your sales representative
to replace the PCI board, system
board, or PCI riser card.
For PCI boards which do not need
to be bootable, activate the BIOS
SETUP utility to disable extension
of the expanded ROM on the PCI
board. Securely install the PCI
boards and PCI riser card.
Contact your sales representative
to replace the PCI board, system
board, or PCI riser card.