Table of Contents
Advertisement
Replacing a Chassis Handle
Perform the following steps to replace the left or right chassis handle.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Unlock the front bezel with the security key, and remove the front bezel.
Extend the server out of the rack.
3.
Remove the two screws securing the right or left handle to the server chassis. Save the
4.
screws. The right handle is shown in the illustration below.
Install the replacement handles using the two screws removed in Step 4.
5.
6.
Release the slide rail catches and push the server into the rack.
7.
Install the front bezel.
Security lock
Disassembly and Reassembly 7-67
Screws (2)
Advertisement
Table of Contents
Troubleshooting
