Table of Contents
Advertisement
Installing Maintenance Utilities
Various maintenance utilities are included in your EXPRESSBUILDER DVD. See Chapter 6 for more information on
installing the utilities to your server or management workstations.
Updating the System - Applying Service Pack -
IMPORTANT: If you install the Windows Server 2003 CD-ROM including the Service
Pack 2 to your system, you do not have to apply the Service Pack 2 again.
"Updating the System" is automatically executed by Express Setup.
Execute "Updating the System" in following cases.
Processor is expanded (expanded from single processor to multi-processor).
Modified system configuration.
Recovered the system using recovery process.
See the "Updating the System - Applying Service Pack -" section in Appendix D for details on the update process.
Making Backup Copies of System Information
The system information includes the current BIOS settings and any specific information for the server.
Save the information after completing the system setup.
Without the backup data, you will not be able to recover the information.
You can save the information as described in the following procedure:
1.
Insert the EXPRESSBUILDER DVD into the CD-RW/DVD-ROM drive and reboot the system.
2.
Select [Maintenance Tools (Normal mode)].
3.
Select [English].
4.
Select [Maintenance Utility].
5.
Select [System Information Management].
6.
Insert a floppy disk into the floppy disk drive.
7.
Select [Save].
5-24
Advertisement
Table of Contents
