Expressbuilder - NEC Express5800/120Rd-2 Service Manual

1-30 System Overview

EXPRESSBUILDER

The CD-ROM that comes with the server contains a setup utility called "EXPRESSBUILDER."
When you have first installed the server or append features to the server, use the
EXPRESSBUILDER to set up your server.
Refer to the EXPRESSBUILDER User's Guide, located on your EXPRESSBUILDER CDROM,
for details.
IMPORTANT:
computers than the server, nor other Express5800 series servers than the
one that EXPRESSBUILDER is provided for. Not following this
instruction may cause failures.
The major functions of the EXPRESSBUILDER are:
To install the OS.
!
It installs an operating system.
To diagnose the system.
!
It diagnoses the server.
To create a support disk.
!
It copies utilities in the EXPRESSBUILDER CD-ROM into a floppy disk to launch
them from the floppy disk.
To update the Windows System*
!
It updates the several resources of Microsoft Windows 2000 or Windows NT.
To install the utilities
!
It install the management utilities of ESMPRO and MWA.
To read the online documents*
!
It opens the online document files (".PDF" files).
* These functions are available under Windows system.
NOTE: Some features among those listed above can be used from the
remote computer via cross cable, modem, or LAN (consoleless feature).
See Appendix B for details.
Do not use the EXPRESSBUILDER for any other