Table of Contents
Advertisement
3-40 Configuring Your System
Configuring SCSI Controller on Optional Board
To configure SCSI devices connected to an optional SCSI controller board, use the SCSI BIOS
utility provided with the optional SCSI controller board.
Refer to the manual that comes with the optional SCSI controller board for details.
When the server has multiple SCSI controller boards installed, the server first displays the start-
up message of the SCSISelect utility for the SCSI controller on the system board. It then
displays the utility start-up message for additional SCSI controllers one by one. The start-up
message appears in order of the PCI board slot numbers of the riser card for low-profile type and
the riser card for full-height type. The message displayed may vary depending on the optional
SCSI controller board. Refer to the manual that comes with the optional SCSI controller board
for details.
Advertisement
Table of Contents
Troubleshooting
