NEC Express5800/120Rd-2 Service Manual page 123

The Configuration menu appears.
Configuration
SCSI Bus Interface Definitions
Host Adapter SCSI ID ..................................................
SCSI Parity Checking ..................................................
Host Adapter SCSI Termination...................................
Additional Options
Boot Device Options ....................................................
SCSI Device Configuration ..........................................
Advanced Configuration Options .................................
<F6> - Reset to Host Adapter Defaults
Select a parameter for each menu item.
5.
See the section "Parameters" described later to set an appropriate parameter for each
menu item.
After completing the parameter settings, press Esc repeatedly until the following save
6.
message appears.
Save Changes Made?
If the configuration data is correct, select "Yes" and press Enter.
7.
Press Esc repeatedly until the following exit message appears.
8.
Exit Utility?
Select "Yes" and press Enter to exit.
9.
Configuring Your System 3-33
7
Enabled
Enabled
Press<Enter>
Press<Enter>
Press<Enter>