NEC Express5800/120Rd-2 Service Manual page 208

6-6 Troubleshooting
On-screen error message
8100 Processor 1 failed BIST Burst transfer error of
8101 Processor 2 failed BIST Burst transfer error of
8110 Processor 1 Internal
error (IERR)
8111 Processor 2 Internal
error (IERR)
8120 Processor 1 Thermal
Trip error
8121 Processor 2 Thermal
Trip error
8130 Processor 1 disabled
8131 Processor 2 disabled
8140 Processor 1 failed FRB-
3 timer
8141 Processor 2 failed FRB-
3 timer
Processor 1 failed
8150
initialization on last boot
8151 Processor 2 failed
initialization on last boot
8160 Processor 01: unable to
apply BIOS update
8161 Processor 02: unable to
apply BIOS update
8170 Processor P1 :L2 cache
failed
8171 Processor P2 :L2 cache
failed
8180 BIOS does not support
current stepping for
Processor P1
8181 BIOS does not support
current stepping for
Processor P2
8190 Watchdog Timer failed
on last boot
8191 4:1 Core to bus ratio:
Processor Cache
disabled
8192 L2 Cache size mismatch The second cache in the
8193 CPUID, Processor
Stepping are different
Description
processor 1
processor 2
Internal error (IERR) of
processor 1
Internal error (IERR) of
processor 2
Thermal trip error of
processor 1
Thermal trip error of
processor 2
The processor [1, 2] was
disabled due to an error.
The processor could not be
initialized at booting, and a
timeout occurred.
Processor 1 could not be
initialized at the previous
booting.
Processor 2 could not be
initialized at the previous
booting.
The internal control code of
the processor [1, 2] could
not be applied.
The second cache in the
processor [1, 2] could not be
initialized.
A processor of an
unsupported type is
installed.
A watchdog timer error
occurred at the previous
booting.
The cache of the processor
was disabled.
processor does not match.
The CPU ID or stepping
does not match the value in
the installed processor [1,
2].
Action
Securely install the processor.
Contact your sales representative
to replace the processor or system
board.
Securely install the processor.
Contact your sales representative
to replace the processor or system
board.
Securely install the processor.
If the message is displayed each
time the system is booted, contact
your sales representative to
replace the processor or system
board.
Contact your sales representative
to replace the processor or system
board.
Securely install the processor.
If the message is displayed each
time the system is booted, contact
your sales representative to
replace the processor or system
board.
Install processors under the same
specification.