NEC Express5800/120Rd-2 Service Manual page 303

19. Place the fan unit in the server.
The bottom of the fan unit has cutouts for the unit to be mounted into tabs on the bottom
of the server. Align the cutouts with the tabs and place the fan unit into the server.
IMPORTANT:
cable, peripheral cables, and components.
Slide the fan unit to the right when viewed from the front of the server, and secure it.
20.
IMPORTANT:
cable, peripheral cables, and components.
NOTE: Confirm that the release tab of the fan unit is locked.
21. Connect the two fan cables.
Connect them according to the print on the system board.
Connect the FPC cable.
22.
Be careful not to damage the main power cable, power
Be careful not to damage the main power cable, power
Disassembly and Reassembly 7-59
Main power cable
Main power cable
Release tab