Problems With Express Setup - NEC Express5800/120Rd-2 Service Manual

6-20 Troubleshooting

Problems with Express Setup

<For Windows 2000/Windows NT 4.0>
The following message appears when you try to install Express Setup on a hard disk that has a smaller
capacity than the specified partition size:
The specified partition size has exceeded the capacity of the hard disk.
Setup created the partition at the maximum size that can be reserved on the hard disk.
Setup will continue the process.
OK
→ This is not an error. Press Enter to continue the installation.
The following message appeared when copying files from the CD-ROM:
xxxxx : Not Ready xxxxxxxxxxxxxxxxxxZ
xxxxx(A), xxxxx(R), xxxxx(F)
→ Press R. If this message continues to display after you continually press R, restart
Express Setup from the beginning. If this error message continues to display, the
CDROM drive may be defective and should be checked out by qualified personnel.
Express Setup terminated and requests input setup information.
→ There are errors in the specified setup information.
Follow the instructions and input the correct values. It is not necessary to cancel the
installation. On Windows 2000, you might be asked to press Enter again after the
last reboot of the setup.
[Complete] appears on the [Role of Computer] screen.
→ If you click [Complete] here, setup will select the default values of Express Setup
and continue processing.
<The Default Value for Windows 2000>
The specification of network protocol
Protocol :
Service :
Client :
Component :
Application :
TCP/IP[DHCP Specified]
Select sharing Microsoft network files and printer.
Microsoft network client.
SNMP, IIS (Excluding Professional)
ESMPRO Agent
Express Report Service
GAM Server (When connecting Mylex DAC)
GAM Client (When connecting Mylex DAC)
* DAC: Disk Array Controller