Configuring Partitions; Running The Installation And Verification Test - Quantum scalar i40 Quick Start Manual

Scalar i40 and Scalar i80 Quick Start Guide
Installing the Latest Firmware

Configuring Partitions

Running the Installation and Verification Test

14
1 Go to http://www.quantum.com/ServiceandSupport/
SoftwareandDocumentationDownloads/SI40/Index.aspx
to view a listing of the current version of library firmware.
2 Check your library's installed firmware version by selecting Reports > About
Library from the operator panel or Reports > About > Scalar i40/i80 from the
Web client.
3 If the firmware installed on your library is not at the current level, download the
current firmware. Follow the instructions in the
Guide
to upgrade firmware.
At least one partition is necessary for proper setup. You may wish to configure partitions
via the Web client if the Setup Wizard could not set them up exactly as you want them.
To configure partitions via the Web client, select Setup > Partitions. Follow the
instructions in the online help or the
The Installation and Verification Test (IVT) is used to evaluate a newly installed library. It
calibrates the robot to the library, verifies that the robot is functioning properly, and
verifies that the magazines and tape drives are installed correctly and reachable by the
robot. The test also verifies that barcode labels can be read by the robot scanning
operation. See the Scalar i40 and Scalar i80 User's Guide
To run the IVT:
1 Unlock the I/E station.
a From the operator panel, press the Actions button, then press the Down button
to select I/E, then press Select.
b Select Unlock I/E Station and press the Select button.
c If the library contains more than one I/E station, select the top right I/E station
and press Unlock.
The robot moves to the I/E station and unlocks it.
2 When the operator panel display prompts you, pull out on the magazine door until
it stops. If you wait more than 30 seconds, the I/E station re-locks.
and click the Firmware tab
Scalar i40 and Scalar i80 User's
Scalar i40 and Scalar i80 User's Guide
for more details.
Installing the Latest Firmware
.