Edge-Core ECS4110-28T Management Manual page 108

| Using the Web Interface
C 3
HAPTER
Navigating the Web Browser Interface
Table 6: Switch Main Menu (Continued)
Menu
Statistics
Chart
Load Balance
Green Ethernet
RSPAN
Traffic Segmentation
Configure Global
Configure Session
VLAN Trunking
VLAN
Static
Add
Show
Modify
Edit Member by VLAN
Edit Member by Interface
Edit Member by Interface Range
Dynamic
Configure General
Configure Interface
Show Dynamic VLAN
Show VLAN
Show VLAN Member
Tunnel
Configure Global
Configure Interface
Protocol
Configure Protocol
Add
Show
Configure Interface
Add
Show
Description
Shows Interface, Etherlike, and RMON port statistics
Shows Interface, Etherlike, and RMON port statistics
Sets the load-distribution method among ports in aggregated links
Adjusts the power provided to ports based on the length
of the cable used to connect to other devices
Mirrors traffic from remote switches for analysis at a destination
port on the local switch
Enables traffic segmentation globally
Configures the uplink and down-link ports for a segmented group
of ports
Allows unknown VLAN groups to pass through the specified
interface
Virtual LAN
Creates VLAN groups
Displays configured VLAN groups
Configures group name and administrative status
Specifies VLAN attributes per VLAN
Specifies VLAN attributes per interface
Specifies VLAN attributes per interface range
Enables GVRP VLAN registration protocol globally
Configures GVRP status and timers per interface
Shows the VLANs this switch has joined through GVRP
Shows the interfaces assigned to a VLAN through GVRP
IEEE 802.1Q (QinQ) Tunneling
Sets tunnel mode for the switch
Sets the tunnel mode for any participating interface
Creates a protocol group, specifying supported protocols
Shows configured protocol groups
Maps a protocol group to a VLAN
Shows the protocol groups mapped to each VLAN
– 108 –
Page
166
166
191
162
193
193
194
196
199
202
202
202
205
205
205
209
209
209
209
209
209
212
216
219
220
221
221
221
222
222
222