| Using the Web Interface
C
3
HAPTER
Navigating the Web Browser Interface
N
W
AVIGATING THE
EB
H
P
OME
AGE
Users are automatically logged off of the HTTP server or HTTPS
N
:
OTE
server if no input is detected for 600 seconds.
Connection to the web interface is not supported for HTTPS using an
N
:
OTE
IPv6 link local address.
B
I
ROWSER
NTERFACE
To access the web-browser interface you must first enter a user name and
password. The administrator has Read/Write access to all configuration
parameters and statistics. The default user name and password for the
administrator is "admin."
When your web browser connects with the switch's web agent, the home
page is displayed as shown below. The home page displays the Main Menu
on the left side of the screen and System Information on the right side. The
Main Menu links are used to navigate to other menus, and display
configuration parameters and statistics.
Figure 1: Home Page
This manual covers the ECS4110-28T, ECS4110-28P, ECS4110-52T
N
:
OTE
and ECS4110-52P Gigabit Ethernet switches. Other than the difference in
port count and support for PoE (ECS4110-28P/52P), there are no other
significant differences. Therefore nearly all of the screen display examples
are based on the ECS4110-52T. The panel graphics for all of switch types
are shown on the following page.
You can open a connection to the vendor's web site by clicking on
N
:
OTE
the Edge-Core logo.
– 104 –