Figure 1: Home Page; Navigating The Web Browser Interface - Edge-Core ECS4620-28T Quick Start Manual

28/52-port l3 stackable gigabit ethernet switch

Hide thumbs Also See for ECS4620-28T:

Table of Contents

| Using the Web Interface

commands issued through the web interface. See

for STA" on page

Users are automatically logged off of the HTTP server or HTTPS server if no

input is detected for 600 seconds.

Connection to the web interface is not supported for HTTPS using an IPv6

link local address.

To access the web-browser interface you must first enter a user name and

password. The administrator has Read/Write access to all configuration parameters

and statistics. The default user name and password for the administrator is "admin. "

The administrator has full access privileges to configure any parameters in the web

interface. The default user name and password for guest access is "guest. " The guest

only has read access for most configuration parameters. Refer to

Accounts" on page 294

When your web browser connects with the switch's web agent, the home page is

displayed as shown below. The home page displays the Main Menu on the left side

of the screen and System Information on the right side. The Main Menu links are

used to navigate to other menus, and display configuration parameters and

Figure 1: Home Page

This manual covers the ECS4620-28T/52T Gigabit Ethernet switches, the

ECS4620-28F and ECS620-28F-DC Gigabit Ethernet Fiber switch, the ECS4620-28T-

DC Gigabit Ethernet switch, and the ECS4620-28P/52P Gigabit Ethernet PoE

for more details.

"Configuring Interface Settings

"Configuring User

Show Quick Links

Table of Contents